BIOPHOTONICS-BASED INNOVATION: Strategies in Biophotonics highlights moral imperative, practical matters

Nov. 13, 2014
With its focus on helping system and device developers prepare and launch biophotonics-based innovations, the Strategies in Biophotonics conference covered a range of topics from emerging technologies, to selecting strategies and system components, to case studies in systems development for meeting market needs.

"It is the responsibility of those involved in today's biomedical research enterprise to translate the remarkable scientific innovations we are witnessing into health gains for the nation."1 That quote (by former NIH director Elias Zerhouni) launched Robert Nordstrom's presentation at Strategies in Biophotonics (Boston, Sept. 9-11, 2014) and articulated a moral imperative that carried through the entire conference and exhibition, including the closing keynote by Aydogan Ozcan on the democratization of biomedical imaging, diagnostics, and measurement.

With its focus on helping system and device developers prepare and launch biophotonics-based innovations, the conference covered a range of topics from emerging technologies, to selecting strategies and system components, to case studies in systems development for meeting market needs. Presentations also looked at some of the hurdles involved in making photonics-based medical innovations reach their intended goals: Leading a panel of medical practitioners, Fabian D'Souza, MD, MBA, of Boston Strategic Partners demonstrated the importance of understanding practitioners' priorities and workflows when developing new tech for healthcare, while a lively discussion led by Dan Gareau, Ph.D., captured the struggle between tradition and emerging potential in understanding and meeting healthcare needs. John Dexheimer of Lightwave Advisors opened a third panel discussion by noting that the total number of venture capital deals for bio and medical devices has remained stable over the past 7 years, but that the value of the average deal has declined more than 25 percent in the same period. Then, Dexheimer led representatives of angel investing, venture capital, and corporate innovation investment in exploring funding and partnership options for technology innovators.

Exhibit highlights

Among the 40+ exhibits, Gooch & Housego (Ilminster, Somerset, England) debuted a compact, motorized optical delay line-a device that "folds" a light beam to achieve a long interferometer path length in a small space-to enable image formation in compact optical coherence tomography (OCT) systems. The customizable chassis promises to fit into any modular architecture; applications include early diagnosis of macular degeneration and glaucoma. For spectroscopy applications, DELTA Optical Filters (Hørsholm, Denmark) showcased a wedge-shaped near-infrared (NIR) bandpass filter with spectral properties that vary linearly along one side. With an adjustable center wavelength, it can replace multiple dedicated filters; also, it offers blocking better than OD 3 over the complete reflection range, minimal autofluorescence, and high laser damage threshold.

MPB Communications (Montreal, QC, Canada) introduced a continuous-wave (CW) fiber laser, the 2RU-VFL-P-500-750-B1R, that emits at 750 nm with up to 500 mW of output power for super-resolution microscopy. An all-fusion-spliced optical train enables unprecedented stability, the company says. And Plainview, NY-based tec5USA displayed its CGS CCD OEM spectrometer for use in portable and handheld instrumentation, which performs ultraviolet (UV)-NIR spectral data acquisition with a resolution of approximately 2 nm in the UV-visible and 3.5 nm in the NIR.

The event was sponsored by Cambridge Technology, Hamamatsu, Hinds Instruments, and Optimax Systems. 

1. E. A. Zerhouni, N. Engl. J. Med., 353, 15, 1621–1623 (2005).

About the Author

Barbara Gefvert | Editor-in-Chief, BioOptics World (2008-2020)

Barbara G. Gefvert has been a science and technology editor and writer since 1987, and served as editor in chief on multiple publications, including Sensors magazine for nearly a decade.

Sponsored Recommendations

Request a quote: Micro 3D Printed Part or microArch micro-precision 3D printers

April 11, 2024
See the results for yourself! We'll print a benchmark part so that you can assess our quality. Just send us your file and we'll get to work.

Request a free Micro 3D Printed sample part

April 11, 2024
The best way to understand the part quality we can achieve is by seeing it first-hand. Request a free 3D printed high-precision sample part.

How to Tune Servo Systems: The Basics

April 10, 2024
Learn how to tune a servo system using frequency-based tools to meet system specifications by watching our webinar!

Precision Motion Control for Sample Manipulation in Ultra-High Resolution Tomography

April 10, 2024
Learn the critical items that designers and engineers must consider when attempting to achieve reliable ultra-high resolution tomography results here!

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!