• Subscribe
  • Podcasts
  • Videos
  • Webinars
  • White Papers
  • Buyer's Guide
  • Get Published!
  • 2024 Innovators Awards

    • OES (Optimal Engineering Systems)

    Van Nuys, CA 91406

    COMPANY OVERVIEW

    About OES (Optimal Engineering Systems)

    Contact

    6901 Woodley Ave
    Van Nuys, CA 91406
    United States
    http://www.oesincorp.com
    818-222-9200
    888-777-1826
    818-436-0446

    More Info on OES (Optimal Engineering Systems)

    Optimal Engineering Systems, Inc. (OES) is a manufacturer of Motion Control products. The company's product line includes Motion Controllers, Motorized Linear Actuators, Motorized Multi-axis Stages, Motorized Linear Lift Stages, Motorized Rotary Stages, Combined Linear-Rotary Stages, Motorized Goniometer Stages, Solenoid Control Electronics and Manual Positioning Stages.

    Articles

    Software & Accessories

    Rotary stage features 8 mm aperture

    The motorized AY110-40-01 rotary stage has a 40-mm-diameter table, 30 mm high, with a 133 × 57.5 mm footprint.
    Software & Accessories

    Elevator stages feature 2 µm positional accuracy

    Four new motorized elevator stages, the DAG40-200 series, feature 40 mm of vertical travel with a 30 kg load capacity.
    Software & Accessories

    Yaw and pitch series stages have use in laser processing applications

    Yaw-and-Pitch Stages integrate goniometers as the lower stage and rotary stages.
    Oes
    Software & Accessories

    Three-axis gimbal mounts are designed for larger cameras

    LFW Staff
    The AU400-AER series of three-axis gimbal mounts are 588 × 463 mm, and accommodate up to 10 kg.
    Oes
    Software & Accessories

    Three-axis gimbal mounts accommodate loads up to 10 kg

    LFW Staff
    Four AU270-YPR three-axis gimbal mounts were developed to be used with larger and heavier cameras, telescopes, optics, and lasers.
    Oes
    Software & Accessories

    Alignment stages offer 0.25 µm resolution

    LFW Staff
    The XYR-15-60-01 and XYR-15-60-04 XY-Theta alignment stages feature 15 mm of travel in both the X and Y axes.
    Oes
    Software & Accessories

    Four-axes stages have uses in several photonic applications

    LFW Staff
    The XYZ-Goniometer series four-axes stages have positional accuracy to 10 µm.
    Oes
    Software & Accessories

    Goniometer stages feature ±30 degrees of travel

    LFW Staff
    The AK160-30 goniometer stages feature precision ground worm gears with a 400:1 ratio and pre-loaded cross roller guides offer ±30 degrees of travel with 30 kg of load.
    Oes
    Software & Accessories

    Four-axes stages suited for laser scanning, drilling, and machining

    LFW Staff
    XYZR four-axes stages integrate a 15, 30, 50, 75, or 100 mm linear stage for the X, Y, and Z axes, and a 60 or 100 mm rotary stage capable of 360º continuous rotation.
    Oes (optimal Engineering Systems)
    Software & Accessories

    Alignment stages have use in laser drilling

    LFW Staff
    Four AU200-120x120 alignment stages feature 120 mm of travel in the X and Y axes.

    Buyer's Guide Listing Information

    Click here for listing information and directions on how to add or update your company.

    Request More Information From OES (Optimal Engineering Systems)

    By clicking above, I acknowledge and agree to Endeavor Business Media’s Terms of Service and to Endeavor Business Media's use of my contact information to communicate with me about offerings by Endeavor, its brands, affiliates and/or third-party partners, consistent with Endeavor's Privacy Policy. In addition, I understand that my personal information will be shared with any sponsor(s) of the resource, so they can contact me directly about their products or services. Please refer to the privacy policies of such sponsor(s) for more details on how your information will be used by them. You may unsubscribe at any time.

    Additional content from OES (Optimal Engineering Systems)

    Oes Optimal Engineering Systems
    Software & Accessories

    Gimbal mounts feature 3.6 arcsec resolution

    LFW Staff
    Four three-axis azimuth, angular elevation, and roll gimbal mounts locate the surface of the roll stage 115 mm below the center line of rotation.
    Oes
    Software & Accessories

    Tri-axis stages are suited for precision angle measurement

    LFW Staff
    Four different YPR-100-100-100 tri-axis yaw, pitch, and roll stages, offered in -01 to 04 versions, have a maximum speed of 14º/sec.
    Oes
    Software & Accessories

    Rotary table delivers full 360º range of continuous rotation

    LFW Staff
    The AR39-AH miniature rotary stage has uses in microscopy, laser positioning and machining, inspection, assembly, and testing.
    Oes
    Positioning, Support & Accessories

    Alignment stages offer 2 µm repeatability

    LFW Staff
    AU200-100x100 XY alignment stages are capable of 1 µm resolution and 2 µm repeatability.
    Oes
    Positioning, Support & Accessories

    OES gimbal mounts accommodate loads to 20 kg

    LFW Staff
    The AU300-AE-01 and AU300-AE-02 gimbal mounts are suited for cameras, antennas, projectors, lasers, and instrumentation.
    Optimal Engineering Systems
    Positioning, Support & Accessories

    Optimal Engineering Systems dual-axis yaw and pitch stages feature ±45° travel

    LFW Staff
    The YP100-45-01 and YP100-45-02 dual-axis yaw and pitch stages feature a yaw axis capable of rotation in either direction.
    Oes Updated
    Positioning, Support & Accessories

    Optimal Engineering Systems miniature gimbal mounts available in three models

    LFW Staff
    Three-axis miniature gimbal mounts include the stepper motor-driven YPR60-60-60-01, brushless servo motor-driven YPR60-60-60-02, and the DC servo motor-driven YPR60-60-60-03.
    1810 Lfw Pro 16
    Positioning, Support & Accessories

    OES motorized stage integrates into most applications

    LFW Staff
    The AT20-300 motorized stage has vertical lift of 300 mm, carries 50 kg, and is designed for integration into most applications.