DIABETES MANAGEMENT: Novel design helps photoacoustic spectroscopy clear hurdles to noninvasive glucose measurement

Jan. 21, 2014
A new noninvasive approach to blood glucose monitoring uses photoacoustic spectroscopy (PAS): a painless pulse of laser light, applied externally to the skin, is absorbed by glucose molecules and creates a measurable sound signature that reads sugar levels in the fluid in and under skin cells in seconds.

A new noninvasive approach to blood glucose monitoring uses photoacoustic spectroscopy (PAS): a painless pulse of laser light, applied externally to the skin, is absorbed by glucose molecules and creates a measurable sound signature that reads sugar levels in the fluid in and under skin cells in seconds.

The approach was devised by researchers at Biophysics Institute at the University of Frankfurt (Germany).1 Data showing the skin cell glucose levels at one-hundredth of a millimeter beneath the skin is related to blood glucose levels, said lead researcher Werner Mäntele, Ph.D., but previous attempts to use PAS in this manner have been hampered by distortion related to changes of air pressure, temperature, and humidity caused by the contact with living skin.

To overcome these constraints, the team used an open, windowless cavity architecture tuned for optimum performance in the ultrasound range between 50 and 60 kHz. In combination with an external cavity tunable quantum cascade laser emitting from ~1000 to 1245 cm-1, the approach enables a high signal-to-noise-ratio (SNR) for mid-infrared (mid-IR) spectra of human skin. This facilitates measurement in situ the absorption spectrum of human epidermis in the mid-IR region at high SNR in just a few seconds. While the design is still experimental and would have to be tested and approved by regulatory agencies before becoming commercially available, the team continues to refine it. In a close collaboration with an industry partner (Elte Sensoric; Gelnhausen, Germany), they expect to have a small shoebox-sized device ready in three years, followed by a portable glucometer.

1. M. A. Pleitez et al., Rev. Sci. Instrum., 84, 084901 (2013); http://dx.doi.org/10.1063/1.4816723.

About the Author

Barbara Gefvert | Editor-in-Chief, BioOptics World (2008-2020)

Barbara G. Gefvert has been a science and technology editor and writer since 1987, and served as editor in chief on multiple publications, including Sensors magazine for nearly a decade.

Sponsored Recommendations

Request a free Micro 3D Printed sample part

April 11, 2024
The best way to understand the part quality we can achieve is by seeing it first-hand. Request a free 3D printed high-precision sample part.

How to Tune Servo Systems: The Basics

April 10, 2024
Learn how to tune a servo system using frequency-based tools to meet system specifications by watching our webinar!

Motion Scan and Data Collection Methods for Electro-Optic System Testing

April 10, 2024
Learn how different scanning patterns and approaches can be used in measuring an electro-optic sensor performance, by reading our whitepaper here!

How Precision Motion Systems are Shaping the Future of Semiconductor Manufacturing

March 28, 2024
This article highlights the pivotal role precision motion systems play in supporting the latest semiconductor manufacturing trends.

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!