Laser Components GmbH

155G1S14X

High power yet still in the eye-safe range due to wavelength

155G4514X

905D1509X

High power; high reliability and temperature stability; customer-specific designs

905D3309X

905D3708X

Stacked multi-junction delivers an optimal power intensity

Articles

Hollow retroreflectors are insensitive to tilt and rotation

USHM (Ultra Stable Hard-mounted) hollow retroreflectors are self-compensating mirrors with a hard mount that are insensitive to position and movement.

Dielectric mirrors provide 98% average reflection

Highly reflective dielectric mirrors enable optical telescopes to detect less luminous celestial bodies.

When light reflects from a multilayer dielectric, how deep does it go?

John Wallace

Confirmed by experiment, calculations show how deep light goes into a DBR mirror before it reflects; this is relevant for determining microcavity lengths.

Laser Components SMD white light source generates directional light

The LaserLight SMD is a 7 mm SMD chip that provides more than 1000 Mcd/m².

Plasma-ion-assisted deposition (PIAD) produces high-quality optical thin film layers; PIAD films have the desired properties of complete oxidation and high packing density distributed over a wide substrate area.

Spectroscopy

Process diagnostics in PIAD: tracing plasma fluctuations and drifts

The Multipole Resonance Probe (MRP) is a promising way to supervise optical coating processes using active plasma resonance spectroscopy.

Laser Components breaks ground on Arizona detector manufacturing facility

Laser Components breaks ground on detector manufacturing facility in Chandler, AZ

Gail Overton

The facility will open in 2020 and manufacture all detector products for the company.

Laser Components CMOS sensor has use in lidar

A solid-state CMOS sensor is designed for flash lidar applications.

Laser Components NO2 filters can be used with nondispersive IR sensors

Pyroelectric detectors are offered with narrow-band IR filters for measuring nitrogen dioxide.

Redfern Integrated Optics 1064 nm laser has planar lightwave circuit

The Planex laser, which emits the YAG wavelength of 1064 nm, offers linewidth of 15 kHz.

Shown is a diffractive optical element (DOE) that is used in a variety of applications to distribute energy from a single laser beam into multiple beams.

Diffractive laser holes increase shelf life of packaged produce

Gail Overton

Diffractive optical elements split laser beams to create microholes that keep packaged produce fresher.

Buyer's Guide Listing Information

Click here for listing information and directions on how to add or update your company.

Request More Information From Laser Components GmbH

Additional content from Laser Components GmbH

FIGURE 1. Shown is the top view of the high-speed XLIN-FC linear SWIR array that achieves line rates up to 400 kHz for 512-, 1024-, or 2048-pixel resolutions.

Photodetectors: 4th International WORKshop on Infrared Technologies highlights IR photodetector advances

Gail Overton

Whether type-II superlattice or other exotic semiconductor architecture forced to operate in cryogenic, room-temperature, or hot conditions, infrared photodetectors are advancing...

Laser modules from Laser Components feature a microcontroller

FLEXPOINT MVmicro DIG laser modules are equipped with a microcontroller, allowing communication with the module via an RS232 interface.

Test & Measurement

Laser Components interferometer is insensitive to vibrations

The DAISI MT is a combined whitelight/red-light interferometer for the measurement of single- and multi-fiber connectors.

Alluxa, Laser Components enter optical components distribution agreement

Alluxa has entered into a partnership to sell and distribute its optical filters and coatings in Germany, Austria, and Switzerland.

Pyroelectric detectors from Laser Components are based on deuterated L-alanine-doped triglycine sulfate

The LCDT-5000 is for users who want to combine their detectors with their own electronics. The LCDT-5100 is for apps in the 10 to 100 Hz range. The LCDT-5500 is for Fourier transform...

Laser Components Group acquires majority of pyroelectric detector maker Microwatt Applications

As of July 2014, Laser Components Group has expanded its infrared detector activities by acquiring the majority ownership of U.S.-based manufacturer, Microwatt Applications (Stuart...

Laser Components' digital photodiode sensors equipped with InGaAs detectors

The MAJOR series of VIS-NIR digital photodiode sensors will be available in two versions: for the 500 to 1700 nm wavelength range and for the 700 to 2200 nm range.

FIGURE 1. The wavelength-dependent correlation between power and number of incident photons is shown for a single-photon detector.

PHOTON COUNTING: Improved APD design boosts photon-counting detector efficiency

Avalanche-photodiode (APD)-based photon counters have many benefits compared to other photon-counting technologies. Operated in Geiger mode for single-photon detection, they can...

Laser Components, Polymicro Technologies form partnership

Laser Components recently signed a contract with optical fibers manufacturer Polymicro Technologies, which applies to all German-speaking countries and territories.

Laser Components single-photon counting module uses a silicon avalanche photodiode

The Countblue single-photon counting module can detect more than 60% of incoming photons at 405 nm, and more than 65% in the green, with typical detection efficiency in the red...

Laser Components and PicoQuant form photon-counter alliance

John Wallace

Laser Components GmbH and PicoQuant GmbH have forged a strategic alliance to develop and commercialize avalanche-photodiode (APD)-based photon counters.

Laser Components Contracts With Optics For Hire