VI Systems and University of Illinois show VCSEL that transmits 25 Gbit/s over 1 km of multimode fiber

Feb. 19, 2013
Berlin, Germany and Urbana, IL--VI Systems and the University of Illinois at Urbana Champaign have demonstrated a novel single-mode photonic-crystal (PC) vertical-cavity surface-emitting laser (VCSEL) suitable for error-free 25 Gbit/s data transmission over a 1 km length of multimode optical fiber at very low received optical power.

Berlin, Germany and Urbana, IL--VI Systems and the University of Illinois at Urbana-Champaign have demonstrated a novel single-mode photonic-crystal (PC) vertical-cavity surface-emitting laser (VCSEL) suitable for error-free 25 Gbit/s data transmission over a 1 km length of multimode optical fiber at very low received optical power. The laser was demoed at SPIE Photonics West 2013 (Feb. 2-7, 2013; San Francisco, CA).

Target applications are data transmission inside large data centers, supercomputer clusters, and racks of telecom equipment at ultrahigh-bit data rates.

The PC, fabricated as a pattern of microholes in the top layers of the VCSEL, leads to high modulation bandwidth at a low current density. The single-mode operation of the laser, which emits at an 850 nm wavelength, leads to a reduced chromatic dispersion, lengthening the transmission distance as confirmed by measurements at the Technical University of Berlin.

The device was manufactured from a VI Systems wafer, which was processed at the University of Illinois at Urbana-Champaign with a defined photolithographic pattern of holes in the top mirror.

The laser operates at a current density of 5.4 kA/cm2, enabling a -3 dB bandwidth of 18 GHz. Error-free optical data transmission at 25 Gbit/s over 1 km of OM4 multimode fiber was realized at a received power of 70 µW using a high-speed photoreceiver module from VI Systems.

About the Author

John Wallace | Senior Technical Editor (1998-2022)

John Wallace was with Laser Focus World for nearly 25 years, retiring in late June 2022. He obtained a bachelor's degree in mechanical engineering and physics at Rutgers University and a master's in optical engineering at the University of Rochester. Before becoming an editor, John worked as an engineer at RCA, Exxon, Eastman Kodak, and GCA Corporation.

Sponsored Recommendations

Request a free Micro 3D Printed sample part

April 11, 2024
The best way to understand the part quality we can achieve is by seeing it first-hand. Request a free 3D printed high-precision sample part.

How to Tune Servo Systems: The Basics

April 10, 2024
Learn how to tune a servo system using frequency-based tools to meet system specifications by watching our webinar!

Motion Scan and Data Collection Methods for Electro-Optic System Testing

April 10, 2024
Learn how different scanning patterns and approaches can be used in measuring an electro-optic sensor performance, by reading our whitepaper here!

How Precision Motion Systems are Shaping the Future of Semiconductor Manufacturing

March 28, 2024
This article highlights the pivotal role precision motion systems play in supporting the latest semiconductor manufacturing trends.

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!