• Subscribe
  • Podcasts
  • Videos
  • Webinars
  • White Papers
  • Buyer's Guide
  • Get Published!
  • 2024 Innovators Awards

    • Thorlabs Inc

    Newton, NJ 07860

    COMPANY OVERVIEW

    About Thorlabs Inc

    1200

    Contact

    56 Sparta Ave
    Newton, NJ 07860
    United States
    http://www.thorlabs.com
    973-579-7227
    973-300-3600

    More Info on Thorlabs Inc

    Thorlabs designs and manufactures system-level solutions as well as building-blocks for the industry, including optomechanics, motion control, optical components, fiber, lasers, optoelectronics, and imaging components in our 20,000 product catalog.

    Products

    Buyer's Guide

    Quantalux

    The Quantalux sCMOS camera offers extremely low read noise of
    Buyer's Guide

    Mid-Infrared Optical Fiber

    ZBLAN and Indium Fluoride fiber optics for transmission up to 5.5 microns.
    Home

    OCTAVIUS-85M

    Ti:Sapphire laser with one of the broadest spectra commercially available
    Home

    FSL1950F

    Femtosecond fiber laser with >500 mW at 2 microns
    Home

    SC4500

    Femtosecond-pumped mid-infrared supercontinuum source

    Articles

    (Photo credit: Justine Murphy/Endeavor Business Media)
    Jennifer Cable, president of Thorlabs, sat down with Laser Focus World Editor in Chief Peter Fretty to discuss how Thorlabs continues to successfully navigate an evolving marketplace.
    Executive Forum

    Thirst for the future

    Peter Fretty
    Jennifer Cable sits down with Laser Focus World to discuss the Thorlabs culture and efforts to build a skilled workforce.
    (Courtesy of R. Kato/Tokushima University)
    In a schematic of a robust, long-duration TERS imaging technique, a metallic nanotip images several points in a large area of a WS2 monolayer placed on a gold thin film (a). A superposition of two different intensity images, pure WS2 at 422 cm-1 and defect scattering of WS2 at 410 cm-1, reveals a high density of nanoscale protrusions in a large-area far-field confocal Raman image (b). A histogram of the same modes shows a defect density of 5.2% in the WS2 sample (c).
    Science & Research

    Improving the stability and imaging time of TERS

    Valerie Coffey-Rosich
    Advances in tip-enhanced Raman spectroscopy (TERS) can improve spatial resolution and stability, enabling longer imaging and spectroscopic characterization of sub-diffraction-...
    Photo 154741952 © Pop Nukoonrat | Dreamstime.com
    Dreamstime Xl 154741952
    Executive Forum

    From bootstraps to leadership: Panel offers financial perspectives

    Justine Murphy
    The Lasers & Photonics Marketplace Seminar rounded out the day with a panel discussion, moderated by John Dexheimer, president of LightWave Advisors.
    American Chemical Society
    A new multimodal tool combines OCT, fluorescence lifetime (FLIM) imaging, and Raman spectroscopy for rapid and efficient diagnosis (a); the FLIM and OCT data is also shown, with image details correlated with histology results (b).
    Bio&Life Sciences

    Compact multimodal imaging to aid rapid clinical diagnosis

    Richard Gaughan
    A newly developed imaging tool combines optical coherence tomography (OCT), Raman spectroscopy, and fluorescence lifetime imaging (FLIM) in a single multimodal scanning microscope...
    (Photo 91795514 © Ivelinr | Dreamstime.com)
    Dreamstime M 91795514
    Executive Forum

    Thorlabs appoints Jennifer Cable as its president

    LFW Staff
    Jennifer succeeds her father Alex Cable, who founded the photonics equipment company in 1989.
    (Image credit: J. Zhang, MIT)
    Fiber-coupled endoscopic probes scan surrounding tissue at high rates, enabled by a megahertz-range MEMS-VCSEL variable wavelength source (a). The high rates enable angiographic imaging without administering any contrast agent, as in the image of swine esophagus vasculature shown here (b).
    Lasers & Sources

    MEMS swept-wavelength laser enables new OCT capabilities

    Richard Gaughan
    Optical interferometry is accurate and noninvasive, making optical coherence tomography (OCT) a valuable clinical diagnostic tool.
    FIGURE 1. Attenuation of optical fibers made of fluoride glasses, showing a significantly wider transmission window into the mid-IR as compared to silica fibers. Indium fluoride (InF3) glass has a wider transmission window in the mid-IR than zirconium fluoride (ZrF4) glass.
    Lasers & Sources

    Mid-IR supercontinuum laser covers key spectral bands for spectroscopy

    Reza Salem
    A commercially available mid-IR supercontinuum source has a broadband output from 1.3 to 4.5 μm, providing orders-of-magnitude higher brightness than thermal IR sources.
    Thorlabs
    Lasers & Sources

    Correlated photon-pair source integrates a 405 nm pump source

    LFW Staff
    A Correlated Photon-Pair Source produces >450 kHz photon pairs at 810 nm.
    (Image credit: Nanjing University)
    FIGURE 1. Device architecture and metalens fabrication: a schematic of the optical setup for MIID (a), a photograph of the highly compact MIID (b), and a top-view optical microscope image and side-view SEM image of the fabricated α-Si metalens with a diameter of 200 μm (c).
    Optics

    Metalens enables mini microscopic imaging prototype

    John Lewis
    Researchers at Nanjing University have developed a metalens-integrated imaging device (MIID) and centimeter-scale microscopic imaging prototype that breaks FOV constraints.
    Thorlabs
    Test & Measurement

    Thorlabs swept-source OCT system is based on MEMS-VCSEL technology

    LFW Staff
    The Atria swept-source optical coherence tomography (OCT) system produces wavelengths centered at 1060 nm and comes in 60 and 200 kHz versions.

    Buyer's Guide Listing Information

    Click here for listing information and directions on how to add or update your company.

    Request More Information From Thorlabs Inc

    By clicking above, I acknowledge and agree to Endeavor Business Media’s Terms of Service and to Endeavor Business Media's use of my contact information to communicate with me about offerings by Endeavor, its brands, affiliates and/or third-party partners, consistent with Endeavor's Privacy Policy. In addition, I understand that my personal information will be shared with any sponsor(s) of the resource, so they can contact me directly about their products or services. Please refer to the privacy policies of such sponsor(s) for more details on how your information will be used by them. You may unsubscribe at any time.

    Additional content from Thorlabs Inc

    (Image credit: ANU)
    A hologram of fibroblast cells taken at a light intensity substantially above the shot-noise limit has relatively low noise (top). A shot-noise-limited hologram of the fibroblast cells has obvious high noise (center). A Holo-UNet-restored shot-noise-limited hologram has an image quality comparable to the hologram taken at a high intensity. These images are stills from an ANU video that can be found at https://youtu.be/nNkcdZsveHQ.
    Software

    Neural network greatly improves shot-noise-limited microscopy holograms

    John Wallace
    Quantitative phase microscopy (QPM) systems operating under low light to preserve cells can now have high-quality digital-holographic images, thanks to machine learning.
    (Images: University of Texas)
    FIGURE 1. Visible light curing, with the general mechanism (oxidative quenching) for a three-component system (left) and chemical structures of photoinitiator (PI) and photoredox catalysts (PRCs), and corresponding pictures of photocured films with qualitative gel times (right) all shown (a). Chemical structures of iodonium acceptor (A) and borate donor (D) coinitiators (b); chemical structures of opaquing agents (OAs) (c); and photons absorbed vs. wavelength for PI and PRC compounds at optimal photocuring concentration (d) are also shown. OA at 0.5 mM (red) and 1 mM (green, blue, and violet). Light exposure was from calibrated violet (405 nm), blue (460 nm), green (525 nm), and red (615 nm) LEDs at the DLP 3D printer image plane.
    Lasers & Sources

    Photopolymer resins boost visible-light curing speed

    John Lewis
    Researchers at The University of Texas, Austin have developed novel photopolymer resins that contain a three-component light-reactive system to enable rapid and efficient curing...
    A ball lens with a small pass-band-creating air gap (center) can be rotated to move the passband across a large spectral region; here, the ball lens is part of an optical system that can be used in hyperspectral imaging.
    Optics

    Bandpass imaging filter in ball lens is simple and widely tunable

    John Wallace
    Based on frustrated total internal reflection, a tunable filter is compact, has a large range, and can be easily designed into optical systems.
    Chrolis L
    Lasers & Sources

    Thorlabs introduces six-color light engine for fluorescence excitation

    LFW Staff
    The Chrolis six-color light engine for fluorescence excitation applications features a configurable design.
    Thorlabs
    Lasers & Sources

    Thorlabs semiconductor lasers have use in remote sensing

    LFW Staff
    The ULN15PT 1550 nm ultra-low-noise semiconductor laser from Thorlabs provides output power >100 mW.
    Thorlabs
    Optics

    Thorlabs UV focusing objectives have utility in microimaging

    LFW Staff
    MicroSpot focusing objectives are designed for UV excimer lasers and other UV sources in on-axis laser focusing and microimaging applications.
    University of South Carolina
    Thomas Crawford parlayed his research experience with disk drive technology into a startup company that eventually caught the eye of Thorlabs
    Optics

    University of South Carolina startup breaks ground in nano-optical manufacturing

    John Wallace
    Acquisition by Thorlabs facilitates continued university-industry partnership in Columbia, SC.
    Coda Devices
    The Thorlabs acquisition of Coda Devices will include Coda’s portable Raman spectroscopy products, such as this analyzer that can detect heroin and fentanyl inside clear baggies, protecting the lives of first responders who can avoid direct contact with unknown substances.
    Test & Measurement

    Thorlabs ramps Raman spectroscopy expertise through Coda Devices acquisition

    Gail Overton
    The companies will work together to expand the market reach of Coda Devices' coded-aperture Raman Spectroscopy techniques.
    (Courtesy of Thorlabs)
    FIGURE 1. A spectral transmission curve for a high-LIDT polarizing beamsplitter (PBS) cube made by Thorlabs designed for use at 532 nm has a high polarization selectivity. A similar cube designed for use at 1064 nm is shown in the inset.
    Optics

    Optical Coatings: Coatings for laser optics achieve high LIDT

    John Wallace
    For optics used with high-power and high-energy lasers, a high laser-induced damage threshold (LIDT) is crucial.
    FIGURE 1. A schematic depicts the MagAssemble pattern writing process, in which the write head rasters back and forth across the perpendicular magnetic recording medium within each track. By selectively changing the magnetic-field direction of each bit, the charge transition boundaries create a custom 2D template (a). When the template is introduced into a magnetic nanoparticle solution, nanoparticles self-assemble along the magnetic charge transitions (b).
    Home

    Pattern-transfer nanomanufacturing for micro-optics and spectroscopy

    Programmable self-assembly of nanoparticle patterns enables a low-cost platform for nanoscale to mesoscale structures such as life-science substrates, custom diffraction gratings...
    FIGURE 1. The attenuation curve of state-of-the-art, telecommunications-grade silica fiber is contrasted with space-produced ZBLAN and the theoretical ZBLAN attenuation.
    Research

    Optical Fiber Manufacturing: Gravity-free optical fiber manufacturing breaks Earthly limitations

    Alternatives to relatively high loss silica optical fibers like ZBLAN have historically been limited by the confines of gravity fed manufacturing processes. However, this could...
    Fiber Optics

    Thorlabs acquires Norland's fiber-optic product portfolio

    Gail Overton
    Norland develops UV curing adhesives and interferometric test equipment for the fiber-optic industry.
    Content Dam Lfw Online Articles 2018 09 Thorlabs
    Detectors & Imaging

    Thorlabs scientific cameras available with monochrome or color sensor

    LFW Staff
    CS505 scientific cameras offer pixel count of 2448 × 2048 and quantum efficiency of 79% at 600 nm with
    FIGURE 1. A comparison (a) of the signal-to-noise ratio vs. photon intensity for two types of Zyla cameras made by Andor Technology to that of the company’s iXon back-illuminated electron-multiplying CCD (EMCCD) shows that the EMCCD is best for the lowest photon rates, including single photon counting, while sCMOS takes over for higher (but still very low) photon rates). The quantum efficiency (QE) of Andor’s Zyla cameras is optimized for use with a range of fluorophores (b).
    Detectors & Imaging

    Photonics Products: Scientific CMOS Cameras: sCMOS cameras reach new levels of capability

    John Wallace
    sCMOS cameras are now widely used in a variety of leading-edge microscopy techniques, as well as in astronomy and elsewhere.
    Detectors & Imaging

    Thorlabs CMOS camera offers passive thermal management

    LFW Staff
    The 2.1 Mpixel Quantalux scientific CMOS camera is based on a high-performance 1 e- read-noise imager.
    Content Dam Lfw Online Articles 2017 11 Mtd1020t L A1 200
    Positioning, Support & Accessories

    Thorlabs TEC driver incorporates a true bipolar 20 W stage

    LFW Staff
    The OEM-grade MTD1020T TEC driver is a completely integrated digital temperature controller module that provides output currents up to 2 A.
    (Courtesy of Pranalytica)
    FIGURE 1. The VeloXscan QCL by Pranalytica shows simultaneous two-frequency operation.
    Lasers & Sources

    Photonics Products: Tunable Lasers: Commercial quantum-cascade laser technology matures

    John Wallace
    Four example innovations by quantum-cascade laser companies show us where the industry is going.
    Spectroscopy

    Thorlabs establishes PolySense R&D lab to advance optical gas sensing

    Gail Overton
    Thorlabs established PolySense--a joint industry-university research lab in Italy--to advance optical gas sensing.
    FIGURE 1. Absorption and emission cross-sections were determined for a Fe:CdMnTe sample at 80 K; the plot includes absorption features of water (H2O) and carbon dioxide (CO2).
    Lasers & Sources

    Mid-IR Lasers: Ternary-crystal mid-IR laser shows power-scaling promise

    John Wallace
    Specially grown Fe:CdMnTe crystal that emits in the 5 μm spectral region could be made wavelength-tunable in the future.
    Content Dam Lfw Online Articles 2017 02 Midir Supercontinuum Pwest 2017
    Lasers & Sources

    Thorlabs mid-IR supercontinuum source emits >300 mW average power

    LFW Staff
    The SC4500 femtosecond-pumped supercontinuum source spans the wavelength range from 1.3 to 4.5 μm.
    (Courtesy of Newport)
    FIGURE 1. Perhaps the most common laser-safety product is laser-line-blocking eyewear.
    Positioning, Support & Accessories

    Photonics Products: Laser Safety Equipment - Laser safety is an industry unto itself

    John Wallace
    A variety of laser-safety products includes personal gear, a vast array of other hardware, software, and audits and training.
    (Courtesy of Daylight Solutions)
    FIGURE 1. A Daylight Solutions MIRcat QCL (upper right) is embedded as the laser source in an experimental apparatus used for conducting standoff IED detection research [1,2].
    Lasers & Sources

    Photonics Products: Mid-IR Quantum-cascade Lasers - QCLs cover the mid-IR spectrum

    John Wallace
    Small and rugged when packaged properly, the quantum-cascade laser is the light source of choice for many applications operating in the mid-IR.
    Alex Cable
    Software

    Future Optics: Reaping the rewards of photonics in the lab and in business: Interview with Alex Cable

    Working in the lab to assess the scientific, societal, and environmental potential of a new field or updating our business strategy are both fabulous, good fun.
    Barbara G 720
    BioOptics World View

    Neuro15 exhibitors meet exacting demands: Part 2

    Barbara Gefvert
    Increasingly, neuroscientists are working with researchers in disciplines such as chemistry and physics. This trend has been noticed by exhibitors at the Society for Neuroscience...
    Fiber Optics

    Thorlabs to acquire fiber-optic processing company Vytran from NKT

    Gail Overton
    Thorlabs entered into a definitive asset purchase agreement to acquire Vytran from NKT Photonics.
    (Courtesy of TMC)
    FIGURE 1. A large, massive Stage-Base vibration-isolation system from TMC is an example of the technology needed to satisfy the requirements for manufacturing precision and speed in the semiconductor industry.
    Optics

    Photonics Products: Vibration-Isolation Tables: Isolation tables support stable optical setups

    John Wallace
    Essential for many experiments in optics, the vibration-isolation table comes in many forms, including active and passive vibration isolation, as well as pneumatic and non-pneumatic...
    (Courtesy of Edmund Optics)
    FIGURE 1. Kinematic tip/tilt mounts by Edmund Optics use the classic cone, groove, and flat constraint system (left). Three adjustment screws fit into the cone, groove, and flat; two rotational axes (turning either of the black knobs) and one translational axis (turning all three knobs equally) remain adjustable.
    Positioning, Support & Accessories

    Photonics Products: Mounts and Accessories: Tip/tilt mirror mounts deliver accuracy, stability

    John Wallace
    Whether they are three-point kinematic mounts or another form such as flexure or gimbal mounts, tip/tilt mounts are essential for many optical setups.
    Lasers & Sources

    Thorlabs acquires Corning's quantum cascade laser business

    Gail Overton
    Photonics products manufacturer Thorlabs acquired Corning Incorporated's quantum cascade laser (QCL) business and associated optical semiconductor technologies research group ...
    Lasers & Sources

    Thorlabs Ultrafast Optoelectronics established in Michigan

    LFW Staff
    Photonics products maker Thorlabs has established a new business unit, Thorlabs Ultrafast Optoelectronics, to focus on the need for high-speed optoelectronic products with bandwidths...
    Software

    Thorlabs acquires CompuCyte and its Laser Scanning Cytometry (LSC) portfolio

    Gail Overton
    Thorlabs acquired CompuCyte Corporation, a developer of Laser Scanning Cytometry (LSC) products for high-content cellular and tissue-based analysis.
    FIGURE 1. (a) The VCSEL is fabricated using semiconductor processing techniques (b) on wafers yielding many (c) single VCSEL devices. (d) Traditional OCT swept-source technologies tune many laser modes under the tunable filter envelope. (e) The VCSEL differs from previous technologies in that it tunes a single longitudinal mode. (F) A comparison of OCT technologies shows that the VCSEL does not lose appreciable imaging sensitivity over a 12 mm imaging range while previous technologies show significant sensitivity loss over only a few millimeters. (g) The VCSEL can be operated to achieve a 1.5 m OCT imaging range at high imaging speeds, much longer than previous OCT technologies.
    Optical Coherence Tomography

    OPTICAL COHERENCE TOMOGRAPHY/LIGHT SOURCES: Improved OCT imaging with VCSEL technology

    Light sources based on vertical cavity surface-emitting laser (VCSEL) technology enable optical coherence tomography (OCT) to achieve long imaging range, high speed, and flexibility...
    Images of a lily's anther (top) and a pinecone (right) at 100x magnification captured with the LegoScope.
    Microscopy

    An optical microscope so fun and intuitive, a kid could use it

    Lee Dubay
    Three University of California San Francisco (UCSF) researchers had a vision: to find a way to make optical microscopes much easier to understand and more fun to use, particularly...
    (Courtesy of MIT)
    Results of 1060 nm MEMS-VCSEL imaging show (a) 3D OCT data of the anterior eye with an axial eye length measurement to the retina; (b) a light bulb used in OCT imaging experiments; (c) OCT volumetric rendering of the light bulb showing long range imaging with a MEMS-VCSEL; (d) Doppler OCT blood flow measurement in the optic nerve head; and (e) a plot of total arterial blood flow vs. time. Each data point is obtained from a full 3D volumetric analysis, and (f) a wide-field OCT projection image shows 3D data from the human retina obtained at a 1.2 MHz scan rate.
    Test & Measurement

    OPTICAL COHERENCE TOMOGRAPHY: VCSELs accelerate new OCT applications

    Gail Overton
    Lauded for its ability to noninvasively image to depths of several millimeters in medical and industrial applications, optical coherence tomography (OCT) is operating faster and...
    Research

    Thorlabs acquires iGuide mid-IR optical fiber products from IRphotonics

    Gail Overton
    Photonics product manufacturer Thorlabs acquired the mid-IR iGuide optical fiber products of IRphotonics.
    MEMS-based VCSEL achieves 150 nm tuning range via movable suspended mirror
    Lasers & Sources

    MEMS-based VCSEL reaches record 150 nm tuning range

    Gail Overton
    Last year, Laser Focus World reported on a microelectromechanical systems (MEMS)-based 1310 nm widely tunable vertical-cavity surface-emitting laser (VCSEL) that enabled 760 kHz...
    (Image courtesy of collaborators at the Massachusetts Institute of Technology/Thorlabs)
    FIGURE 1. Angiographic OCT fundus image of human retina obtained by swept-source optical coherence tomography (SS-OCT) using a 1050 nm MEMS-VCSEL. Retinal vasculature (red) is superimposed on rich choroidal vessels (green background). Total image size is 12 × 12 mm, and no dye was injected to obtain the image.
    Optical Coherence Tomography

    PRODUCT FOCUS: OCT systems for ophthalmology

    Lee Dubay
    Optical coherence tomography (OCT)—a biomedical imaging technology that can capture three-dimensional (3D) images in-vivo—has emerged as a leading technique in medical diagnosis...
    FIGURE 1. A test object with scattering nanoparticles was used to compare the depth of field (DOF) and lateral resolution of optical coherence tomography (OCT), optical coherence microscopy (OCM), swept-source full-field OCT, and holoscopy. The DOF and lateral resolution are schematically shown (red) in relation to the corresponding Gaussian beam waist.
    Detectors & Imaging

    3D OPTICAL IMAGING: Holoscopy makes ultrafast lensless imaging of scattering tissues possible

    By combining digital holography with optical coherence tomography (OCT) in a process known as holoscopy, 3D parallel image acquisition with extremely high data throughput at high...
    The AgCl window holds the protein rhodopsin which is used in research at the BU Photonics Center to study the initial molecular events that occur in vision. Rhodopsin, which serves as a light receptor, is now being incorporated into nerve cells allowing researchers to selectively control the activity of specific nerves in a complex neural network such as the brain.
    Microscopy

    BIOSENSING/INSTRUMENTATION: Biosensor center supports pre-competitive research

    Susan Reiss
    Back in the early 1990s, the U.S. scientific and engineering communities started to feel the squeeze of global competition.
    FIGURE 1. Depth and resolution are compared for various imaging techniques (a). OCT images of renal blood vessels were obtained in the X-Y (b), X-Z (c), and Y-Z (d) planes and used to construct a composite 3D image (e). Resulting depictions from visualization software include a 3D volumetric image of the segmented blood vessels (f), a measured and color-coded 3D image of the renal diameters (g), and a volume histogram of the distribution of blood-vessel diameters (h).
    Research

    MEDICAL IMAGING: OCT finds value in both art and science

    Known commonly as a retinal-imaging tool, optical coherence tomography has plenty of other uses for both medical imaging and nonmedical imaging.
    FIGURE 1. Attendees at the BioOpto Japan conference in September.
    Bioimaging

    BIOMEDICAL IMAGING, SPECTROSCOPY: Japanese research focus of BioOpto Japan

    The inaugural BioOpto Japan (September 16–17, Yokohama) was held in conjunction with LED Japan Conference & Expo/Strategies in Light and OITDA 2009; together the events drew 7132...
    Home

    Thorlabs and BMC partner on MEMS-based adaptive optics

    LFW Staff
    NEWTON, NJ-Thorlabs and Boston Micromachines Corporation (BMC; Cambridge, MA) have announced a new partnership, which will allow BMC, a provider of advanced microelectromechanical...