Researchers at the University of California Los Angeles (UCLA; Los Angeles, CA) have improved upon the capabilities of fluorescence microscopy, using artificial intelligence (AI) to turn two-dimensional (2D) images into stacks of virtual three-dimensional (3D) slices showing activity inside organisms.
In their study, the research team also reported that their framework, called “Deep-Z,” was able to fix errors or aberrations in images, such as when a sample is tilted or curved. Further, they demonstrated that the system could take 2D images from one type of microscope and virtually create 3D images of the sample as if they were obtained by another, more advanced microscope.
The method is enabled by deep learning to perform 3D imaging of live specimens with very little exposure to light to avoid damage to samples, says senior author Aydogan Ozcan, UCLA chancellor’s professor of electrical and computer engineering and associate director of the California NanoSystems Institute at UCLA.
Related: Deep learning improves microscopy images—without system adjustments
In addition to sparing specimens from potentially damaging doses of light, this system could offer biologists and life science researchers a new tool for 3D imaging that is simpler, faster, and much less expensive than current methods. The opportunity to correct for aberrations may allow scientists studying live organisms to collect data from images that otherwise would be unusable. Investigators could also gain virtual access to expensive and complicated equipment.
This research builds on an earlier technique Ozcan and his colleagues developed that allowed them to render 2D fluorescence microscope images in super-resolution. Both techniques advance microscopy by relying upon deep learning—using data to “train” a neural network, a computer system inspired by the human brain.
Deep-Z was taught using experimental images from a scanning fluorescence microscope, which takes pictures focused at multiple depths to achieve 3D imaging of samples. In thousands of training runs, the neural network learned how to take a 2D image and infer accurate 3D slices at different depths within a sample. Then, the framework was tested blindly—fed with images that were not part of its training, with the virtual images compared to the actual 3D slices obtained from a scanning microscope, providing an excellent match.
Ozcan and his colleagues applied Deep-Z to images of C. elegans, a roundworm that is a common model in neuroscience because of its simple and well-understood nervous system. Converting a 2D movie of a worm to 3D, frame by frame, the researchers were able to track the activity of individual neurons within the worm body. And starting with one or two 2D images of C. elegans taken at different depths, Deep-Z produced virtual 3D images that allowed the team to identify individual neurons within the worm, matching a scanning microscope’s 3D output, except with much less light exposure to the living organism.
The researchers also found that Deep-Z could produce 3D images from 2D surfaces where samples were tilted or curved—even though the neural network was trained only with 3D slices that were perfectly parallel to the surface of the sample.
In other experiments, Deep-Z was trained with images from two types of fluorescence microscopes: wide-field, which exposes the entire sample to a light source, and confocal, which uses a laser to scan a sample part by part. Ozcan and his team showed that their framework could then use 2D wide-field microscope images of samples to produce 3D images nearly identical to ones taken with a confocal microscope.
This conversion is valuable because the confocal microscope creates images that are sharper, with more contrast, compared to the wide field. On the other hand, the wide-field microscope captures images at less expense and with fewer technical requirements.
“This is a platform that is generally applicable to various pairs of microscopes, not just the wide-field-to-confocal conversion,” says Yair Rivenson, UCLA assistant adjunct professor of electrical and computer engineering and the study's co-first author. “Every microscope has its own advantages and disadvantages. With this framework, you can get the best of both worlds by using AI to connect different types of microscopes digitally.”
Full details of the work appear in the journal Nature Methods.
Got biophotonics-related news to share with us? Contact Lee Dubay, Associate Editor, BioOptics World
Get even more news like this delivered right to your inbox